Dynamix DW-01 Manuel d'utilisateur télécharger pdf (Page 35)

Dynamix DW-01Plus/S Gateway User Manual

- 31 -

3.2 NAT mode (PPPoE)

Step 1. Set PPPoE mode, using [pppoe –dve 1], input the user id & password

provided by your ISP, using [pppoe –id –pwd], reboot the device after

disconnection, using [pppoe –reboot 1]

usr/config$ pppoe –dve 1 (PPPoE used)

usr/config$ pppoe –open (PPPoE open)

usr/config$ pppoe –id [email protected] (PPPoE login account)

usr/config$ pppoe –pwd 123 (PPPoE login Passowd)

usr/config$ pppoe –reboot 1 (Enable)

Step 2. Set NAT function (Default NAT function is enable)

usr/config$ ifaddr -nat 1

For example:

usr/config$ ifaddr -print

Internet address information

LAN IP address : 192.168.123.123

WAN IP address : 192.168.13.71

Subnet mask : 255.255.248.0

Default gateway : 192.168.8.254

NAT enabled : ON

DHCP startup : OFF

SNTP : mode=1

server 168.95.195.12

time zone : GMT+8

cycle=1024 mins

IPSharing : no IPSharing device.

Primary DNS Server : 168.95.192.1

Secondary DNS Server : 168.95.1.1

usr/config$

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Pas de commentaire

Dynamix DW-01 Manuel d'utilisateur Page 35