Dynamix DW-01 Manuel d'utilisateur télécharger pdf (Page 34)

Dynamix DW-01Plus/S Gateway User Manual

- 30 -

Note:

With Dynamic WAN IP Address, when the WAN IP is changed, we need to

change the external IP of Dynamix DW-01Plus/S Gateway using above command.

1. Different Vendor’s Router will have different appearance of setting.

2. Once you set the DMZ Host, you don’t need to configure the Port Forwarding and

vice versa.

3. If there is only one Dynamix DW-01Plus/S Gateway attached to the IP Sharing

device, it is recommended to use DMZ Host setting to enable the NAT traverse

and disable the Port Forwarding.

4. If there are two or more sets of Dynamix DW-01Plus/S Gateway attached to the

IP-Sharing device, please configure the Port Redirection (Forwarding) to enable

the NAT traverse and disable the DMZ Host.

5. After the IP Sharing configuration of Dynamix DW-01Plus/S Gateway and IP

Sharing device is complete, you must reboot the Dynamix DW-01Plus/S Gateway

to activate the new settings.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Pas de commentaire

Dynamix DW-01 Manuel d'utilisateur Page 34