Dynamix UM-S Manuel d'utilisateur télécharger pdf (Page 21)

G.shdsl Router User Manual 152

Configuration to the router

This guide is designed to lead users through Web Configuration of G.shdsl Router in the easiest

and quickest way possible. Please follow the instructions carefully.

Note: There are three methods to configure the router: serial console, Telnet and Web Browser.

Only one configuration application is used to setup the Router at any given time. Users

have to choose one method to configure it.

For Web configuration, you can skip step 3.

For Serial Console Configuration, you can skip step 1 and 2.

Step 1: Check the Ethernet Adapter in PC or NB

Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the

router. TCP/IP protocol is necessary for web configuration, so please check the TCP/IP protocol

whether it has been installed.

Step 2: Check the Web Browser in PC or NB

According to the Web Configuration, the PC or NB need to install Web Browser, IE or Netscape.

Note: Suggest to use IE5.0, Netscape 6.0 or above and 800x600 resolutions or above.

Step 3: Check the Terminal Access Program

For Serial Console and Telnet Configuration, users need to setup the terminal access program

with VT100 terminal emulation.

Step 4: Determine Connection Setting

Users need to know the Internet Protocol supplied by your Service Provider and determine the

mode of setting.

Protocol Selection

RFC1483 Ethernet over ATM

RFC1577 Classical Internet Protocol over ATM

RFC2364 Point-to-Point Protocol over ATM

RFC2516 Point-to-Point Protocol over Ethernet

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 101 102

Pas de commentaire

Dynamix UM-S Manuel d'utilisateur Page 21