Dynamix DW 2 FXO Guide de l'utilisateur télécharger pdf (Page 70)

Step 5: Set Route Plan to each FXO line.

Disable the “VOIP Default Route” first.

Figure 12.

Set the Incoming Call Type to VOIP; Matched Prefix number from 1001 to

1004; Matched Length to 0 and Outgoing Type to FXO. See Figure 12.

For example: Configure Route Plan to each line of FXO Gateway.

a. Line #1 of FXO Gateway setting, see Figure 13.

An FXS port 1 incoming call routes to FXO port 1 configuration example.

Incoming Call Type : VOIP

Matched Prefix : 1001

Matched Length : 0

No Answer Timeout : 30 (MUST be longer than 10 seconds).

Outgoing Type : FXO

Hunting Type : selected anyone.

Routing List : 01. Line 1 ; 02. None. ; 03. None ; 04. None.

Routing List is going to select the first priority of Line number 1 to 4. At this

application, Only Line 1 is allowed to connect with remote FXS telephone 1.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 80 81

Pas de commentaire

Dynamix DW 2 FXO Guide de l'utilisateur Page 70