Dynamix DW 2 FXO Manuel d'utilisateur télécharger pdf (Page 29)

Port 1: FXO was connected to PSTN.

Port 2: FXO was connected to PSTN.

Port 3: FXO was connected to PSTN.

Port 4: FXO was connected to PSTN.

H.323 number “123”call incoming, Port 1 will be off-hook and hear the Dial Tone from

PSTN.

If Port 1 is busy, Port will be will be off-hook and hear the Dial Tone from PSTN.

If Port 1 and 2 are busy, Port 3 will be off-hook and hear the Dial Tone from PSTN.

If Port 1, Port 2 and Port 3 are busy, Port 4 will be off-hook and hear the Dial Tone from

PSTN.

(Note: “123” will be register to H.323 Gatekeeper when Gateway when

Registering H.323 Gatekeeper Mode)

Example3: Termination Call to FXO for One-Shoot Call

Port 1: FXO was connected to PSTN (area code is 81xxxxxxxx).

H.323 leading number “081x”incoming, and delete the first one digit “0”, and call to

PSTN number.

(Note: “081x” will be register to H.323 Gatekeeper when Gateway when

Registering H.323 Gatekeeper Mode)

In the “PSTN Route Dial Plan Configurations” settings: Maximum Entries : 20

“Inbound number” is the leading digits of the dialing number.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Pas de commentaire

Dynamix DW 2 FXO Manuel d'utilisateur Page 29